Mill Thread Solid Carbide


Mill Thread Solid Carbide 

Mill Thread Solid Carbide tools advantages:

• Thread is generated in one pass.

• Spiral flutes allow smooth cutting action.

• Shorter machining time due to multi, 3 to 6, flutes.2.2 mm and up cutting diameter.

• Threads up to shoulder in blind holes.   

• Longer tool life due to special multi-layer coating.

• Same tool can be used for a variety of materials.

• Excellent surface finish.

• Low cutting pressure allows thin wall machining.

• Same tool used for R.H. and L.H. threads.

Carbide grade: MT7

• Sub-micron grade with Titanium Aluminium Nitride multi-layer coating (ISO K10-K20).

• To be run at medium to high cutting speeds.

• General purpose for all materials.


Thread Mills with Internal Coolant Bore (MTB):

• Coolant fluid washes the chips out of hole

• Increased tool life  

Thread Mills with internal coolant through the flutes (MTZ):

Those unique thread mills enable the coolant fluid stream to reach efficienatly the cutting edge, for smooth cutting operation.Its advantages are:  

• Especialy designed for threading on "through holes".

• Direct chip removal.

• Optimal for machines without external coolant. 


Solid - Carbide threads mills with internal coolant bore that includes specific cutting  length and relieved neck.



• To perform medium and large threads on relatively deep work pieces.

• Reduce cycle time by using higher cutting speeds and feeds.

• To use over hang according to the application.

• To perform deep threads at the bottom of the application



• Provides high rigidity and stability (anti-vibrations) 

• To accomplish deep threads in one pass. 

• Relatively low cutting forces due to short cutting length which enables reduction of the radial in feed required.

• Internal coolant for effective chip removal.

• Spiral flutes allow smooth cutting action and shorter machining time.

• Threads length up to 3D